Cisco MC3810 Series Quick Start Manual page 18

Get Site Information
Get This Information from Your Network Administrator
This table provides space to write down information you need to run the System Configuration Dialog (also
called the setup script).
Item Ask Your Network Administrator
1 What do you want to name the Cisco MC3810 (to
distinguish it from other Cisco devices on your network)?
2 What should the encrypted enable secret password be?
3 What should the nonencrypted enable password be?
4 What should the password for remote console (Telnet)
access be? This is referred to as the virtual terminal
password (Telnet password).
5 Do you want to configure the Cisco MC3810 for:
SNMP?
— If so, what is the community string?
IP?
16
IGRP routing?
— What is the IGRP autonomous system number?
IPX?
— What are the IPX network numbers?
Bridging?
6 Do you want to configure the modems for:
Default chat script?
Dial-in IP SLIP/PPP access?
Dynamic IP address?
Default IP address?
TCP header compression?
Routing updates on async lines?
Async IPX?
7 Will you be using the Ethernet 0 (10BaseT) interface?
What is the IP address?
How many bits in the subnet mask?
Configure IPX on this interface?
— IPX network number?
Enter the Information in This Column