Honeywell Experion 8 Series Technical Information page 37

Series 8 Controller and I/O Specification, S803-150-500
Contact Life
Module Removal and Insertion
Under Power
Relay Cable assembly
Note 1 – The minimum 10mA load current and 5 VDC load voltage specified are only valid if the contact has not been previously
used in high current / high voltage applications. Once a relay contact is used in a high current / high voltage application, the minimum
load current is 100mA
Is u
Note 2 – sed to connect Relay Extension board with DO IOM with IOTA
Version 1
Mechanical : Min. 20,000,000 operations
Electrical: Min. 100,000 operations @ 3A
Supported
2
Honeywell Part # 51155506-xxx (0.5 mtr to 50 mtr cable length options)
37
July 2017