Care And Cleaning - GE Profile Smart P8MSASS6TBB Owner's Manual

Care and Cleaning

WARNING
Unplug the appliance before cleaning.
Refer to the table below before cleaning the parts with water, a damp
cloth, or using any parts in the dishwasher.
DO NOT soak attachments in acidic liquid.
injury
1. Clean the main unit with a damp cloth.
2. Clean the other parts in hot water either in the sink or dishwasher after
referring to the table.
3. Store the appliance in a dry place after cleaning.
Part
Bowl / Bowl Lid
11-Wire Whisk
Beater
Dough Hook
Attachment Output Shaft Cleaning Tips:
1. Wipe down the attachment output shaft after
each use to remove excess flour.
2. For dry ingredients, use a warm, damp, cloth to gently wipe down
3. For wet ingredients, use a warm, damp, soapy cloth to gently
4. To ensure the full range of motion is cleaned; pull the attachment output
shaft down and clean the revealed surface.
5. Use a cleaning brush to remove any dough that may have blocked the
attachment output shaft.
NOTE: Attachment must be inserted into the attachment output shaft for full
range of motion.
16
Sink Dishwasher Damp Cloth
Attachment
output shaft
49-9000044 Rev. 0