(From the previous page)
Lines can be added or deleted with the key + , ,, or . Users can draw a horizontal line
from the cursor position to the position of the next contact, coil, or line by pressing
Deleting a line
A ladder program to be created
X2
X0
Y0
X3
6.
The symbol is displayed!
Y0
Y3
Y2
1.
Click!
2.
Drag!
3.
The line is deleted!
4.
Press the Delete key!
6.
The added symbol (
7.
Click [Convert] → [Convert] () from the
menu to convert the ladder program.
This section describes how to delete a line in the
ladder program shown on the left.
1.
Move the mouse pointer close to the exiting
line, and click the displayed icon.
2.
Drag the icon along the line to be deleted.
3.
Release the left button of the mouse to delete
the line.
The line connected to "END" cannot be deleted.
4.
Press the key to delete (
5.
Click [Convert] → [Convert] () from the
menu to convert the ladder program.
37
) is displayed.
Y3
or
+ +
.
).
Y3