Table of Contents
Advertisement
20
1
2
3
21R
6
ASSEMBLY STEP 1
STEP 1 HARDWARE :
1
2
Bolt
Spring Washer
M8
Ø8.2
Qty: 4
Qty: 4
1.1 Open hardware for Step 1.
1.2 Attach the Front Stabilizer (21F) and Rear
Stabilizer (21R) to the Main Frame (20) using
4 Bolts (1), 4 Spring Washers (2) and 4 Flat
Washers (3), and tighten firmly.
21F
3
Flat Washer
Ø8.2
Qty: 4
22
ASSEMBLY STEP 2
1
Bolt
M8
Qty: 3
2.1 Open hardware for Step 2.
2.2 Insert Handlebars (22) into Handlebar Post (23)
and secure the front with 1 Bolt (1), 1 Spring
Washer (2) and 1 Flat Washer (3). Do not fully
tighten hardware until end of Step 2.
2.3 Secure the side with 2 Bolt (1), 2 Spring
Washer (2), 2 Flat Washer (3).
2.4 Fully tighten bolts from Steps 2.2 & 2.3.
3
23
2
1
STEP 2 HARDWARE :
2
3
Spring Washer
Flat Washer
Ø8.2
Ø8.2
Qty: 3
Qty: 3
7
Advertisement
Table of Contents
