Table of Contents
Advertisement
4. Real Time Monitoring at the Simple Viewer Page
A user can change the configuration of frame rate, image resolution or color mode by operating the
button or bar at the lower part of the simple viewer page. Also, you can monitor image in server push
mode by pressing server push button
Pressing DVR control button, you are moved to the login page for dvr/ptz control page.
•
Server Push Mode
If DX-VS1UE is connected to network protected by firewall and image of DX-VS1UE cannot be
seen from PC located at the outside of the network, press server push button and change into server
push mode. Image of DX-VS1UE would be seen from the PC. "Image Quality" control, "Focus Area"
control and "Focus Sensitivity" control is not supported in this mode.
1) Image control
There are three menus for controlling image display.
(1) Frame Rate
You can select image transmission speed among 1fps, 5fps, 10fps, 15fps and no limit. If you select
"no limit", DX-VS1UE transmit image as fast as possible depending on network environment. Frame
rate is actually dependant on both network environment and performance of PC. DX-VS1UE can
transmit at up to 30 frames per second.
28
DX-VS1UE User's Manual
Advertisement
Table of Contents
