Table of Contents
Advertisement
Installation
^ To adjust the toe-kick height, first
loosen the headless screws at the
cover front and adjust the cover
height.
^ Then tighten the headless screws.
Removing the mounting rails
^ Remove the cover strip a and the
upper b and lower mounting rails of
the refrigerator door.
^ You will need these nuts for fastening
the custom door panel to the
refrigerator door.
34
Both mounting rails will later be
fastened to the door panel of the
refrigerator door.
^ Remove the cap covers and loosen
the screws on both sides.
^ Remove the mounting rails on the
sides of both freezer drawers.
These mounting rails will later be
installed on the door panel of the
freezer drawers.
^ You will need the nuts for fastening
the door panel to the freezer drawers.
Advertisement
Table of Contents
