Makita XOB02 Instruction Manual page 10

3. Re-tighten the screws firmly to secure the triangu-
lar/rectangular pad.
Triangular pad
Fig.16
► 1. Screws 2. Triangular pad 3. Sanding base
You can install the abrasive paper on the side of the pad
as illustrated.
1
2
1
Fig.17
► 1. Abrasive paper 2. Pad
Rectangular pad
Fig.18
► 1. Screws 2. Rectangular pad 3. Sanding base
4.
Remove all dirt and foreign matter from the trian-
gular/rectangular pad.
5.
paper to the triangular/rectangular pad, aligning the
dust-suction holes in the paper with those in the pad.
Triangular pad
1
1
2
2
3
Fig.19
► 1. Abrasive paper 2. Triangular pad 3. Dust-suction holes
Rectangular pad
1
2
1
2
3
Fig.20
► 1. Abrasive paper 2. Rectangular pad 3. Dust-suction holes
6.
10 ENGLISH
Attach a sheet of optional hook-and-loop abrasive
1
3
2
3
1
2
To remove the abrasive paper, peel it off from the edge.
3
3
1
3