Maintenance - Makita 9031 Instruction Manual

MAINTENANCE
CAUTION :
Always be sure that the tool i s switched off and unplugged before attempting t o perform
inspection or maintenance.
Replacing carbon brushes
3
Remove and check the carbon brushes
regularly. Replace when they wear down
to the limit mark. Keep the carbon brushes
clean and free t o slip in the holders. Both
carbon brushes should be replaced a t the
Limit mark
same time. Use only identical carbon
brushes.
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure the
brush holder caps.
I
\
Brush holder cap
L
Screwdriver
'To maintain product SAFETY and RELIABILITY, repairs, nay other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
8