Page 1
The repeater is a low cost communication component for use when some remote thermostats are too far from the main mesh of a Honeywell device cluster and cannot communication with a WEBs AX controller with a wireless communication card (TB-VWG-APP-1014).
WIRELESS REPEATER FOR TB7200/7600 SERIES WIRELESS THERMOSTATS INSTALLATION CAUTION • Electronic controls are static sensitive devices. Discharge yourself properly before manipulation and installing the Repeater. • Short circuit or wrong wiring may permanently damage the thermostat or the equipment. Mounting Guidelines •...
Page 3
•Non-line of sight distance for typical drywall partitions made with metal stud frame should be under 30 feet (10M) 3. Ensure that the minimum distance between any Honeywell ZigBee node and any Wi-Fi devices (wireless routers, wireless adapters, lap-tops using wireless networks, etc.) is at least 3 feet (1 M) and preferably 10 feet (3 M) or more.
Page 4
WIRELESS REPEATER FOR TB7200/7600 SERIES WIRELESS THERMOSTATS TB-RP5000W Deployment Considerations When Honeywell wireless thermostat cannot be discovered or added to a WEBs-AX controller database due to distance, the use of repeaters to bridge communication back to the WEBs-AX controller is necessary.
Page 5
WIRELESS REPEATER FOR TB7200/7600 SERIES WIRELESS THERMOSTATS REPEATER STATUS LED IMPORTANT Be sure all thermostats/repeaters connected to a WEBs-AX controller have the same PAN ID and Channel as the WEBs-AX wireless communication card (TB-VWG-APP-1014). Table 1. Repeater Wireless Adapter LED Status Indicators 1 x 200ms short blink Power on 2 x 200ms short blinks...
Default value = 10 specific Honeywell wireless communication card. For every Set to: 15 or 25 thermostat or repeater reporting to a Honeywell WEBs controller with a wireless communication card be sure you set the SAME channel Range is: 10 to 26 value both at the gateway and the wireless device(s).
WIRELESS REPEATER FOR TB7200/7600 SERIES WIRELESS THERMOSTATS SPECIFICATIONS Thermostat Compatibility: TB7200 and TB7600 Series wireless thermostats Network Protocol: ZigBee wireless mesh WEBs-AX Controllers: Compatible with WEB-2xx, WEB-6xx, and WEB-7xx Platform: WEB-2xx and WEB-6xx - WEBStation-AX 3.0 or later WEB-7xx - WEBStation-AX 3.5 or later Repeater power requirements: 19-30 Vac 50 or 60 Hz;...
Page 8
WIRELESS REPEATER FOR TB7200/7600 SERIES WIRELESS THERMOSTATS By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys’...