Solving Problems: Dell OptiPlex 745 User's Guide
If the power light is amber and green or steady amber —
malfunctioning or incorrectly installed.
Remove and then reinstall the memory modules.
●
Remove and then reinstall any cards.
●
Remove and then reinstall the graphics card, if applicable.
●
If the power light is blinking amber —
The computer is receiving electrical power, but an internal power problem might exist.
Ensure that the voltage selection switch is set to match the AC power at your
●
location (if applicable).
Ensure that the processor power cable is securely connected to the system board.
●
Eliminate interference —
Power, keyboard, and mouse extension cables
●
Too many devices on a power strip
●
Multiple power strips connected to the same electrical outlet
●
Printer Problems
Fill out the
Diagnostics Checklist
CAUTION:
Before you begin any of the procedures in this section, follow the safety
instructions located in the Product Information Guide.
NOTE:
If you need technical assistance for your printer, contact the printer's
manufacturer.
Check the printer documentation —
troubleshooting information.
Ensure that the printer is turned on
http://support.dell.com/support/edocs/systems/op745/en/UG_en/solving.htm (13 of 18) [10/19/2007 9:39:12 AM]
Great user manuals database on
Some possible causes of interference are:
as you complete these checks.
See the printer documentation for setup and
UserManuals.info
A device might be