When Recognized Under "Other Devices" In Windows Device Manager - Epson RC700 Series Maintenance Manual

Maintenance 10. Troubleshooting
10.2.2 When recognized under "Other devices" in Windows Device
If "
manager as shown in the following dialog, delete "
manager and connect the USB cable again to correct the problem.
(1) Select and right click "
(2) Select [Uninstall].
(3) The [Uninstall Device] dialog appears.
(4)
(5)
NOTE

72
Manager
EPSON Robot Controller
Click the <Uninstall> button.
Remove the USB cable and connect the USB cable again.
The massage, "Install EPSON Robot Controller", will be displayed at the bottom right of
the window screen.
Controller is installed automatically.
When the message, "EPSON Robot Controller is installed and ready to use.", is displayed
at the bottom right of the window screen, communication is available.
If the problem is not corrected, please contact the supplier of your region.
" is recognized under "Other devices" in the Windows device
EPSON Robot Controller
EPSON Robot Controller
" from the device
" in the [Device Manager] dialog.
RC700 Series Maintenance Rev.3