Step: Creating The Technology Dbs - Siemens SIMATIC S7-300 Getting Started

3.9

8. Step: Creating the technology DBs

Procedure
Step Activity
1 Change to "Technology Objects Management". Confirm the first message box with "OK", and the second
with "Yes".
If you are not running the "Technology Objects Management" application yet or it is closed, you can open it
by double-clicking on the "Technological objects" object in the "Technology" folder in the SIMATIC
Manager (refer also to step "Configuring the axis(axes) with S7-Technology").
Result: "Technology Objects Management" opens.
Edit the DB numbers as shown in the figure in order to adapt these for use in our example.
2 Create the following technology DBs by selecting all lines
and clicking "Create":
Axis_1
•
Axis_2 (if this exists)
•
Trace
•
MCDevice
•
3 Close "Technology Objects Management".
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05
3.9 8. Step: Creating the technology DBs
Result
The system generates the technology DB 1
to DB 3, or DB 4 respectively.
Learning units
25