Honeywell CIPer 30 Installation And Operation Manual page 41

CIPer TM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
8. Select the port priority value for the ports 0, 1, 2, and 3 from the drop-down list.
9. Enter the values for Hello Time, Forward Delay Time, and Maximum Aging Time from the
respective specified range.
10. Click Save to apply the changes or select Refresh to cancel the changes.
11. Right click on the RSTP workbench window, click Action > Apply RSTP settings. This action
reboots the controller and effected changes will be effective.
Honeywell Building Technologies
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
® U.S. Registered Trademark
© 2020 Honeywell International Inc.
31-00206-02 | Rev 07-2021