Turning On; Lcd Display; Select Ctcss Privacy Code (00-38) - Cobra microTALK PR 900 DX Operating Instructions Manual

Operation

Turning On

Turning On Your microTALK PR 900 DX
Y our microTA L K
PR 900 DX
Note
Wh e n ever the unit is on yo u
can re ce i ve co m m u n i ca t i o n s,
Turn the Volume Control clockwise to switch
( except while pushing the
power on. Set volume to desired level. Turn
P TT Talk Bu t to n , or while
the Volume Co nt rol co u nte r - c l oc kwise to turn
in Mode Fu n ct i o n ) .
power off.
Illuminating Illuminating the Display
the Display
Press and release
4
TURN KNOB
CLOCKWISE
PRESS AND
RELEASE
Monitor Button to illuminate
display for ten seconds.
Select Channels (1-15)
Main Channels 1-7 are shared with FRS radios .
PRESS
UP OR DOWN
Turn on your microTALK PR 900 DX. An audible
"tone" will indicate the unit is on and the LCD
will self-test for 2 seconds and then go to
Operational Mode.
Select channel by pressing and releasing the
Channel Up or Down Buttons.

Select CTCSS Privacy Code (00-38)

Selecting a CTCSS Privacy Code will enable you
to filter out unwanted conversations and allow
greater privacy. For example, when with a group
of friends, you select channel 7 and privac y
code 1, you will hear your friends and filter out
conversations on channel 7 with privacy c odes
2 through 38.
Operation
Select
Channels
Note
Units must be on same Main
Channel and CTCSS Privacy
Code to communicate.
Note
Push and hold Channel Up
or Down Buttons for fast
channel/code advance.
Select CTCSS
Privacy Code
Note
If you push and hold the
Mode Button,the LCD
display will cycle through
the different functions.
5