Auto Channel Scan List - Cobra microTALK PR 900 DX Operating Instructions Manual

Advanced Features
Scan Function
Scan Function
PRESS
Press
unit will begin scanning the Main Channels.
Unit will co ntinue to scan all Main Ch a n n e l s
with CTCSS Pri va cy Codes that are on the scan
list (p.19) and stop if an incoming tra n s m i s s i o n
is dete cte d.
A. Press and hold
Your radio will return to Operational Mode
on that channel as long as a signal is dete cte d
or...
B. Press
rescan the Main Channel.
or...
C. To exit scan either press the
Button or turn the unit off.
18
continued
Channel Up or Down Buttons and the
PTT Talk Button and talk.
Channel Up or Down Buttons to
Mode
Auto Channel Scan List Selection Mode
This fe at u re allows you to add or re m ove Ma i n
Channels from the scan list.The scan list is
p re - p rog rammed to channels 1-15 with no
C TCSS Pri va cy Cod e s.
Press the Mode Bu t ton until the icon S K I P
or S CA N flashes on the LCD panel. The channel
is set to the solid ico n .
Pressing either Channel Up or Down
Buttons will toggle be tween skip and sca n .
Pre s s the PTT Talk Bu t ton to co n f i rm your
s e l e ct i o n ( s ) .
PRESS AND
RELEASE
19
Advanced Features
Auto Channel
Scan List
Selection
Mode
19