Gs1-128 Message Length; Telepen; Telepen On/Off; Telepen Output - Honeywell HH1800 User Manual

GS1-128 Message Length

Scan the barcodes below to change the message length. Refer to
(page 82) for additional information. Minimum and Maximum lengths = 1-80. Minimum
Default = 1, Maximum Default = 80.

Telepen

Telepen On/Off

Telepen Output

Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1 and decodes
them as standard full ASCII (start/stop pattern 1). When Original Telepen Output is selected,
the scanner reads symbols with start/stop pattern 1 and decodes them as compressed
numeric with optional full ASCII (start/stop pattern 2). Default = AIM Telepen Output.
HH1800 User Guide
Minimum Message Length
On
<Default All Telepen Settings>
Off
Message Length Description
Maximum Message Length
* Off
99