Cisco SX10 User Manual page 2

Placing a Call
1. Placing a call using 'Search or Dial'
A. Select 'Call' and press
control or press the green 'Call' button on the
remote control.
C. To enter the dialing address, press the
corresponding keys on the remote control. To
invoke the virtual keyboard, use the left arrow
cursor key on the remote control. You may now
move about the virtual keyboard and select
characters. Press 'OK'
access numbers click '123'
2. Placing a call from 'Contacts,' 'Favorites' or the 'Directory'
Favorites: contacts that have been saved by you. This list includes contacts you call frequently.
Directory: contacts from all Regional Health Authorities and NLCHI.
Recents: list of calls you have previously placed, received or missed.
A. Select 'Call' and press
press the green 'Call' button on the remote control.
C. Once an entry has been
located, press 'OK' on the
remote control to invoke the
'Call' menu.
E. Then press 'OK' or the
on the remote control to place the call.
'OK' on the remote
to select a character. To
and then 'OK.'
'OK' on the remote control or
green 'Call' button
B. Use the up Cursor key to select the
'Search or Dial' field at the top of the
menu. Press 'OK.'
D. Once your dialing address has been
entered, press the green
place the call.
B. When the contact list appears, use the
horizontal cursor keys on the remote control
to go between 'Favorites',
'Directory' (horizontally) and then down in
one of the lists.
D. Narrow down your search by typing the
part or all of the system name or location in
the 'Search or Call' bar.
'Call' button to
'Recents' and
August 2019