Talking To Another Party - Cobra MicroTalk MicroTalk 2-Way Radio Operating Instructions Manual

FRS305 MANUAL.qx 12/5/00 9:56 AM
Operation
Talking to
Another Party
Note
Your incoming "Call"audio
ringing level is dependent on
your unit's volume s e t t i n g.
Select desired channel by moving the Channel
Button up and down. Both the calling and
receiving units must be on same channel and
subchannel for the call function to work.
Press and release
tor icon will flash and the
on for 3 seconds.The unit you are calling will
hear a 2 second ring tone.
Your microTALK is always in the Standby Mode
when the Talk Button is not depressed.
10
Page 10
Call Button. The indica-
icon will remain
Press and hold Talk Button.
Th e i con will appe a r.
Hold mic about 2 inches from mouth.
Speak in a normal voice.
Release Talk Button and listen for response.
Operation Headline
Talking to
Another Party
Note
While Talk Button is depressed
you cannot
receive incoming calls.
Note
When you release the
Talk Button,the person you are
talking to will hear a tone indi-
cating that it's ok to talk. See
Talk Confirmation Tone section
on page 14.
11