Calling Another Party; Talking To Another Party - Cobra Microtalk Series How To Use Manual

PMR100-UK.qx copy 6/17/99 9:36 AM
Operation
Calling

Calling Another Party

Another
To alert another par ty that you wish to
Party
communicate:
Note
Units must be on same
channel to communicate.
Turn on your MicroTalk 2-way radio.
1
Choose Channel A or B. An audible "tone" will indicate the unit is on
and the
Note
unit will illuminate green.
You can also communicate
with other 2-way PMR
radios (some have as many
as eight channels).
Channel A = Channel 3 on
other units
Frequency is 446.03125 MHz
Channel B = Channel 5 on
other units
Frequency is 446.05625 MHz
Place antenna in full
2
upright position.
6
Page 6
TX/RX indicator on the front of the
3 Select Channel A or
Channel B by mov i n g
the CHANNEL butto n
up or down.
Push and release CALL button. The unit you are
4
calling will hear a two second ring/tone.

Talking To Another Party

To send your outgoing message:
Push and hold The TX / RX indicato r
1 2
PTT button. will illuminate red.
Hold mic about Release
3 4
2 inches from button and listen
mouth. Speak in for response.
a normal voice.
Operation
Note
Your incoming "Call"signal
level is dependent on your
unit volume s e t t i n g.
Talking To
Another Party
Note
While PTT button is
depressed you cannot
receive incoming calls.
PTT
7