Panasonic FP7 Series User Manual page 5

Safety Precautions
● In order to prevent injuries and accidents, always adhere to the following.
● Always read this manual thoroughly before performing installation, operation, maintenance, and inspection,
and use the device correctly.
● Ensure you are familiar with all device knowledge, safety information, and other precautions before use.
● In this manual, safety precaution levels are classified into "warnings" and "cautions".
● Implement safety measures externally from this product so that the entire system can operate safely even if
a failure occurs due to a fault in this product or some external factor.
● Do not use in an environment containing flammable gases.
Doing so could cause explosions.
● Do not dispose of this product by placing it in fire.
This could cause rupture of batteries, electronic components, etc.
● Do not apply force, electrical charge, fire or heat to the lithium batteries.
It may lead to ignition and/or rupture.
● In order to prevent the product from generating abnormal heat or emitting smoke, use the product with some
margin to the guaranteed characteristics and performance values.
● Do not disassemble or modify the product.
Doing so could cause abnormal heat generation or smoke.
● Do not touch electrical terminals while the power is on.
There is a risk of electrical shock.
● Construct external emergency stop and interlock circuits.
● Securely connect wires and connectors.
Poor connections can cause abnormal heat generation or smoke.
● Do not perform work (connection, disconnection, etc.) while the power is on.
There is a risk of electrical shock.
● If methods other than those specified by our company are used when operating this product, the protection
functions of the unit may be lost.
● This product was developed and manufactured for use in industrial environments.
Copyright and Trademarks
● Panasonic Industrial Devices SUNX Co., Ltd. owns the copyright of this manual.
● Unauthorized copying of this document is strictly prohibited.
● Windows is a registered trademark of the USA Microsoft Corporation in the USA and in other nations.
● Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and the Xerox Corporation in the USA.
● This product includes the following open-source software. Please refer to "Open Source Software Licenses"
for information regarding open-source software (OSS).
● Other company and product names are trademarks or registered trademarks of their respective companies.
Handling Precautions
■
In this manual, the following symbols are used to indicate safety information that
must be observed.
WUME-FP7CPUH-09
Cases where dangerous situations are expected to arise whereby the user could die or
suffer serious injury if handled incorrectly
Cases where dangerous situations are expected to arise whereby the user could suffer
injury or physical damage could occur if handled incorrectly
Indicates an action that is prohibited or a matter that requires caution.
v