Troubleshooting; Optional Accessories - Makita XCU11 Instruction Manual

TROUBLESHOOTING

ment parts for repairs.
Malfunction status
The chain saw does not start.
The saw chain does not run.
The motor stops running after a little use.
No oil on the chain.
The chain saw does not reach maximum
RPM.
Chain does not stop even the chain brake
is activated:
Stop the tool immediately!
Abnormal vibration:
Stop the tool immediately!
The saw chain cannot be installed.

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
accessories or attachments might present a risk of
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Saw chain
• Guide bar
• Guide bar cover
• File
• Tool bag
• Makita genuine battery and charger
WARNING:
If you purchase a guide bar of
purchase a suitable guide bar cover together. It
saw.
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
Battery cartridge is not installed.
Battery problem (low voltage).
Chain brake activated.
Battery's charge level is low.
Oil tank is empty.
Oil guide groove is dirty.
Battery cartridge is installed improperly.
Battery power is dropping.
The drive system does not work correctly.
The brake band is worn down.
Loose guide bar or saw chain.
Tool malfunction.
The combination of saw chain and
sprocket is not correct.
The use of any other
Cause
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
19 ENGLISH
Action
Install a charged battery cartridge.
Recharge the battery cartridge. If recharging
Release chain brake.
Recharge the battery cartridge. If recharging
Fill the oil tank.
Clean the groove.
Install the battery cartridge as described in
this manual.
Recharge the battery cartridge. If recharg-
cartridge.
region for repair.
region for repair.
region for repair.
Use the correct combination of saw chain
and sprocket by referring to the section for
-