Operation When The Number Of Determination Files Reaches The Maximum Number Of Generations - Panasonic FP7 Series User Manual

● Although the logging/trace active flag turns off once the logging stop condition is met, the SD
card logging active flag stays on.
● When the card cover is closed, the SD card logging active flag also turns off.
● The logging operation into the logging buffer (RAM) continues even when no SD memory
card is inserted. Once the logging buffer (RAM) becomes full, the buffer overflow flag turns
on.
■
File status in SD memory card
● The file "specified file name (------current------).csv" in which logging data was saved before
opening the cover is held in the SD memory card.
● Once the card cover is closed, the saving into files starts again.
4.2.5 Operation when the number of determination files reaches the
maximum number of generations
■
Operation when the number of determination files reaches the maximum number
of generations
● The operation when the number of determination files reaches the maximum number of
generations varies depending on the log file settings.
File determination
condition
Setting of "When
max. generation"
Stop
Continue
WUME-FP7CPULOG-04
4.2 Operation When Logging is Selected for Application
Operation
1. Determines a current file "specified file name (------current------).csv", gives the
time data of the oldest record, and renames it.
2. Creates a new current file "specified file name (------current------).csv".
1. Determines a current file "specified file name (------current------).csv", gives the
time data of the oldest record, and renames it.
2. Deletes the oldest file.
After deleting it, updates the data of the oldest file displayed in the system monitor
area (SM).
3. Creates a new current file "specified file name (------current------).csv".
4-5