Setting Dynamike; Transmit; Rf Meter - Cobra 25 NW ST Operating Instructions Manual

25 NWST Manual3.3 6/15/99 12:43 PM
Operation
Setting

Setting Dynamike

Dynamike
This controls the microphone sensitivity
(outgoing audio level).
1 Initially, set fully
mum voice volume is available. Dynamike
may have to be reduced in some conditions.
18
Page 18
clockwise so that maxi-

Transmit

Push and hold mic button to transmit.
1
Transmitter is now activated. When transmit-
ting, hold the microphone two inches from
your mouth and speak in a clear, normal voice.
Release to receive.

RF Meter

This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
Operation
Transmit
RF Meter
19