Figure 4-13: Setup Wizard's Check Settings Screen; Figure 4-14: Digital Signature Not Found Screen; Figure 4-15: Setup Wizard's Congratulations Screen - Linksys WUSB54G User Manual

Wireless-G USB Network Adapter
7. The Setup Wizard will ask you to review your settings before it starts to install files. Click Next if you are
satisfied with your settings, or click Back to change any settings.
8. At this point, you may see a Digital Signature Not Found screen indicating that a digital signature was not
found. The Adapter's software has been tested and found to work successfully with Windows 2000. Click the
Yes button to continue.
9. After the software has been successfully installed, the Congratulations screen will appear. Click the Exit
button.
Proceed to "Chapter 5: Connecting the Wireless-G USB Network Adapter."
Chapter 4: Setting up the Wireless-G USB Network Adapter
Using the Setup Wizard

Figure 4-13: Setup Wizard's Check Settings Screen

Figure 4-14: Digital Signature Not Found Screen

Figure 4-15: Setup Wizard's Congratulations Screen

13