Figure 4-5: Setup Wizard's Ad-Hoc Mode Settings Screen; Figure 4-6: Setup Wizard's Wireless Security Screen - Linksys WUSB54AG User Manual

Wireless A/G USB Network Adapter
5. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc Mode, select the correct operating
channel for your network. Then, select the Network Mode from the drop-down menu. Click the Next button,
and go to Step 5. Click the Back button to change any settings.
Channel - The channel you choose should match the channel set on the other devices in your wireless
network. If you are unsure about which channel to use, select the default channel (Channel 6).
Network Mode - Select Mixed Mode if you want to allow Wireless-G and Wireless-B computers on the
network, even though network speeds will be reduced. For maximum speed, select G-Only Mode; however,
no Wireless-B users will be allowed on the network.
6. Select the Encryption method you want to use: WEP or WPA - Personal. WEP stands for Wired Equivalent
Privacy.
NOTE: More encryption options are available when using the Wireless
Network Monitor. See Chapter 6: Using the Monitor for these options.
If you don't want to use encryption, select Disabled and then click the Next button to continue. Proceed to
Step 7.
Click the Next button to continue or the Back button to return to the previous screen.
Chapter 4: Setting up the Wireless A/G USB Network Adapter
Using the Setup Wizard

Figure 4-5: Setup Wizard's Ad-Hoc Mode Settings Screen

Figure 4-6: Setup Wizard's Wireless Security Screen

9