Setting Up The Adapter; Figure 4-4: Available Wireless Network - Linksys WPC200 User Manual

Wireless-G Business Notebook Adapter with RangeBooster

Setting up the Adapter

The next screen to appear will be the Available Wireless Network screen.
This screen provides two options for setting up the Adapter.
• Available Wireless Network. (For most users.) Use this option if you already have a network set up. The
networks available to this Adapter will be listed on this screen. You can choose one of these networks and
click the Connect button to connect to it. Click the Refresh button to update the Available Wireless Network
list.
• Manual Setup. If your network is not listed on this screen, select Manual Setup to set up the adapter
manually. This method of setting up the Adapter is intended for Advanced Users only.
The setup for each option is described, step by step, under the appropriate heading on the following pages.
Click Exit to close the Setup Wizard, if you wish to set up the Adapter later.
Available Wireless Network
The available networks are listed in the table on the center of the screen by SSID. Select the wireless network you
wish to connect to and click the Connect button. (If you do not see your network listed, you can click the Refresh
button to bring the list up again.) If the network utilizes wireless security, you will need to configure security on
the Adapter. If not, you will be taken directly to the Congratulations screen.
1. If you have wireless security enabled on your network, continue to step 2. Only One of these security screens
will be shown. If you don't have wireless security enabled, continue to step 3.
2. Wireless Security
If your network has WEP, WPA-Personal, or WPA2-Personal wireless security enabled, then that security
screen will appear. Continue to the screen for your wireless security.
Chapter 4: Setting up and Connecting the Wireless-G Business Notebook Adapter
Setting up the Adapter

Figure 4-4: Available Wireless Network

9