Linksys WCF12 User Manual page 7

6. Choose either Infrastructure mode or Ad-Hoc mode, depending on your
needs. If you are unsure whether to choose Infrastructure or Ad-Hoc, refer
to "Chapter 2: Planning Your Wireless Network" for more information.
Once you have made your choice, click the Next button.
7a. If you chose Infrastructure Mode, go to Step 7b now. If you chose Ad-
Hoc Mode, select the correct operating channel that applies to your net-
work. The channel you choose should be the same as the channel for the
other computers and devices in your wireless network. Channel 6 is the
default. Select the appropriate channel, and click the Next button.
8
Instant Wireless
Figure 3-5
Figure 3-6
Wireless CompactFlash Card
TM Series
7b. Enter your wireless network's SSID. The SSID must be identical for all
points in the network. The default setting is linksys (all lowercase). Enter
this information, and click the Next button.
8. At this point, the Wizard will ask you to review your settings before copy-
ing files. Select Back to review or change any settings or Next if you are
satisfied with your settings.
Figure 3-7
Figure 3-8
9