Using The Configuration Utility - Linksys WCF12 User Manual

Using the Configuration Utility

Use the various screens to customize the Wireless CompactFlash Card's set-
tings. Click the tab of the screen you wish to view.
LINK
The Link screen provides information about the current link between the
Wireless CompactFlash Card and the wireless network. You cannot make any
changes using this screen.
16
Instant Wireless
Figure 4-5
Series Wireless CompactFlash Card
TM
State The State field displays MAC address information about the Access
Point with which the Wireless CompactFlash Card is communicating.
Current Channel The Current Channel field shows the channel setting of the
Wireless CompactFlash Card.
Current Tx Rate The Current Tx Rate field shows the transfer rate in
megabits per second.
Disable Radio Click this button to turn off the Wireless CompactFlash Card.
Rescan Click the Rescan button to refresh the information displayed on the
Link screen.
Throughput The Throughput fields show the rates at which data is transferred
and received in bytes per second.
Link Quality The Link Quality field displays a bar indicating the link's qual-
ity. The higher the percentage, between 0 and 100 percent, the better the link.
Signal Strength The Signal Strength field displays a bar indicating the signal
strength. The higher the percentage, between 0 and 100 percent, the stronger
the signal.
17