Linksys PPS1UW Quick Installation page 2

EtherFast ® Wireless-Ready USB PrintServer
Installing the Wireless-Ready PrintServer's Drivers
1. To begin driver installation, click Start , select Run, and type
D:\Driver\Win9xnt\AddPort_Linksys.exe (where D is the
letter of your CD-ROM drive) in the Open field that appears.
Click OK.
2. The Install Wizard window appears.
appears and click Next.
3. Click Next to accept the default Destination Directory, shown
below (recommended). If you choose to utilize another direc-
tory, click
Browse and
choose the
appropriate
d i r e c t o r y.
Then, click
Next.
4. The following screen will assign a Program Folder to the
Windows Taskbar. The default Program Folder is the "Linksys
PrintServer Driver". If you would like to use another name for
the Program Folder, type it in the Program Folders field or
select one
from the
E x i s t i n g
F o l d e r s
field. Click
Next to
continue.
5. Driver installation is now completed but the Print Driver still
needs to be configured. The Wireless-Ready PrintServer will
not function properly until the Print Driver is configured.
Check the box beside Configure Print Driver Now and click
Finish to continue.
6. Before setting up and configuring the Print Port, follow the
directions on the screen below and click OK to continue.
7. The Print Port Setup screen will display the Wireless-Ready
PrintServer and all of the printers with which it communicates.
Here, you have the option of installing the printer by high-
lighting its description and clicking Next. You can also close
this screen by clicking Close.
QI-PPS1UW-011208A KL
8. This will display the Configure Printer Port screen. Any installed
printers will be displayed in the Existing Printers field. You can
install a printer by clicking Add New Printer.
9. The Add New Printer Wizard will come up at this point. Follow
the standard pro-
cedure for adding
printers
Read the text that
Windows. If you
have any ques-
tions on adding
printers, please
refer
Windows docu-
mentation.
10. After your print-
er(s) have been
added, you will
return
Configure Printer
Port screen. Click
the Connect but-
ton to connect the
printer(s).
11. The Printer Port Setup screen will appear again, displaying the
printers which are now communicating with the Wireless-Ready
PrintServer. Click the Next button to add any more printers or
Close to complete the installation and configuration procedure.
If the Wireless-Ready PrintServer does not appear in this window:
• Windows 95/98/Millennium users -
PrintServer probably does not have an IP address. You can assign one
using the Bi-Admin software.
PrintServer Management in the User Guide. If you know you are
using DHCP through software or your router/hub/switch, try resetting
the Wireless-Ready PrintServer and clicking the Browse button again.
If this does not work, refer to the Troubleshooting section in the User
Guide.
• Windows NT 4.0 or 2000 users - try resetting the Wireless-Ready
PrintServer and clicking the Browse button again. If this does not
work, refer to the Troubleshooting section in the User Guide.
Installation of the Wireless-Ready PrintServer is now complete.
For information on configuring the Wireless-Ready PrintServer on
a Windows 95/98/Millennium computer, refer to the Windows 95,
98 and Millennium Port Configuration section in the User Guide.
If you are configuring the Wireless-Ready PrintServer on a
Windows NT 4.0 or 2000 computer, refer to the Windows NT and
2000 Port Configuration section in the User Guide.
Model No.: PPS1UW
under
to your
to the
See the section on Bi-Admin:
the Wireless-Ready