Figure 6-8: Administration Tab - Status - Linksys NSLU2 User Manual

Network Storage Link for USB 2.0 Disk Drives
Status
The Status screen allows you to check the Storage Link's details and status.
System
Server Name. The Server's current name. This name will be shown in "Network Neighborhood" or "My Network
Places".
IP Address. This displays the Storage Link's current IP Address.
Current Status. Indicates the Storage Link's current status. This will usually state "Ready". If the Server is not
available, the message will say why the Server is not available (e.g., Scandisk in Progress.)
• Click the Shutdown Now button to immediately shut down the Storage Link. This will break all existing
connections. None of your data will be saved.
• Click the Restart Now button to restart (reboot) the Storage Link. This will break all existing connections. The
Storage Link will immediately restart, and won't be available again until after the Restart is complete. None of
your data will be saved.
• Click the View Log button to view the log file in a separate window. The log file is a record of the Storage
Link's activity, which can help in management and troubleshooting. Click the Refresh button to refresh the
screen. Click the Clear Log button to clear all of the log's data.
Shutdown. Use these fields to set up a shutdown schedule, if desired. The available options are:
Never - This means that scheduled shutdowns will not be performed.
Every Day - Select this to shutdown each day, at the specified time.
Every Monday, Every Tuesday, ... - Select this to shutdown once per week, on the specified day.
Use the time fields (hour, minute, am/pm) to specify when the shutdown should be performed.
Restart. Use these fields to set up a restart schedule, if desired. The options for Restart are the same as those for
Shutdown.
Disk 1/Disk 2. This displays the types of drives connected as well as how much space remains.
Chapter 6: Configuring the Storage Link
Administration Tab

Figure 6-8: Administration Tab - Status

21