Installation and Removal Directions for the MGBT1
1. Insert the Gigabit SFP Mod-
ule with the printed side up
and the pull tab facing out.
2. Lock the Gigabit SFP Module
in place.
3. Connect the Cat5 cable to the
Gigabit SFP Module's port.
Connect the other end of the
Cat5 cable to another switch
that is equipped with a Link-
sys MGBT1 or Gigabit
Ethernet port.
Figure 1-8: Insert the MGBT1
Figure 1-9: Lock the pull tab
Figure 1-10: Connect the Cat5 cable
5