Appendix D: Finding The Mac Address And Ip Address For Your Ethernet Adapter - Linksys BEFCMUH4 User Manual

6. Find and double-click TCP/IP in the list to the right (see Figure C-2).
7. After a few seconds, the main Network window will appear. The TCP/IP
Protocol should now be listed.
8. Click the OK button. Windows may ask for original Windows installation
files. Supply them as needed, e.g., c:\windows\options\cabs, D:\win98,
D:\win95.
9. Windows will ask you to restart the PC. Click the Yes button.
The TCP/IP installation is now complete.
58
Instant Broadband
Figure C-2
Figure C-3
Cable Gateway
® Series
Appendix D: Finding the MAC
Address and IP Address for Your
Ethernet Adapter
This section describes how to find the MAC address for your Ethernet adapter
to do either MAC Filtering for the Gateway and ISP. You can also find the IP
address of your computer's Ethernet adapter. The IP address is used for filter-
ing. Follow the steps in this appendix to find the MAC address or IP address
for your adapter in Windows 95, 98, Me, NT, 2000, and XP.
For Windows 95, 98, and Me:
1. Click on Start and Run. In the Open field, enter winipcfg. Then press the
Enter key or the OK button.
2. When the IP Configuration window appears, select the Ethernet adapter
you are using to connect to the Gateway via a CAT 5 Ethernet cable.
Figure D-1
Figure D-2
59