Linksys BEFCMUH4 User Manual page 15

Instant broadband series cable gateway modem / router / usb / home pna / 4-port switch / wireless-ready

Hide thumbs Also See for BEFCMUH4:

Table of Contents

Enlarged version

Remote Config Management

Note: Linksys recommends that you change the password for

your Cable Gateway if you enable Remote Config

Management.

Multicast Enable

Instant Broadband

This feature allows you to manage the

Cable Gateway from a remote location,

via the Internet. Click Enable. To remote-

ly manage your Cable Gateway,. enter

http://<WAN IP Address>:8080 into the

browser of any PC on the Internet. Press

the Enter key.

This feature allows for multiple transmis-

sions to specific recipients at the same

time. Select Enable to support the feature.

Cable Gateway

Series

IP Filtering Tab

This screen allows you to configure IP address filters for your Gateway.

To filter an IP address, enter the IP addresses into the Start Address and End

Address fields. Click the Enabled button to enable the changes.

Click the Apply button to apply any changes to the settings.

Figure 5-3

Table of Contents