How To Test Your Internet Connection - Linksys E1500 User Manual

Linksys E-Series
To disable the lights using the browser-based utility:
For
E1200 E1500 E2500 E3200
Status > Ports
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 23)
2. Click the Status tab, then click the Ports page
3. In the Rear Port Lights section, click off, then click Save Settings
To disable the lights using the browser-based utility:
For
E4200
Setup > Basic Setup
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 23)
2. Click the Setup tab, then click the Basic Setup page
3. Set Rear Port Lights to off, then click Save Settings at the bottom of
the page

How to test your Internet connection

What utilities are included in my router to test my Internet connection?
Your router includes two diagnostic tests, Ping and Traceroute, that let you
check network connections, including network devices and your Internet
connection
To diagnose your Internet connection:
Administration > Diagnostics
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 23)
2. Click the Administration tab, then click the Diagnostics page
3. To check whether an address can be reached, enter an IP address or URL,
a packet size, and number of times to ping in the Ping Test section, then
click Start to Ping
Maintaining and Monitoring
64