CLICK ANYWHERE on THIS PAGE to RETURN to ANTI-SCALD PROTECTION
GUIDES at InspectApedia.com
AMX300 DirectConnect™
Mixing Valve Kits
Included in this box (see Fig. 1)
1.
AMX300 thermostatic mixing valve ("A")
2.
Cold water tee ("B")
3.
Flexible metal connector ("C")
4.
Thermostrip ("D")
5.
AMX300 Mixing Valve Installation Instructions
(literature # 62-3112)
6.
AMX300 Mixing Valve Kit Installation Instructions
(literature # 62-3113)
A
B
C
Fig. 1. Mixing valve kit contents.
Tools needed (not supplied)
1.
2.
Safety Definitions
These safety terms identify information you must read.
CAUTION
Indicates a hazardous situation which, if not
avoided, could cause bodily injury or property
damage.
WARNING
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
GETTING STARTED
CAUTION
For the homeowner's comfort, safety and
convenience, it is recommended this mixing valve
kit be installed and serviced by a plumbing
professional.
D
ºF ºc
These instructions provide detailed instructions for
140
60
138
installation and maintenance of the mixing valve kit.
58
136
57
You must read these instructions carefully and
134
56
completely to ensure proper installation.
132
55
130
54
128
53
126
52
Safety Precautions
124
51
122
50
120
49
118
48
116
47
WARNING
114
46
112
44
110
43
Water inside the water heater is very hot and
presents a scalding hazard.
Water temperatures in excess of 125 ºF (52 ºC) can
cause severe burns. Explain this to homeowner and
emphasize the risks associated with adjusting the
mixing valve settings.
M29694A
INSTALLATION INSTRUCTIONS
Wrench
Pliers
62-3113-01