HIKVISION DS-K3B220X Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Control Systems
  5. DS-K3B220X Series
  6. User manual
HIKVISION DS-K3B220X Series User Manual

HIKVISION DS-K3B220X Series User Manual

Swing barrier
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K3B220X Series Swing Barrier
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-K3B220X Series

Summary of Contents for HIKVISION DS-K3B220X Series

  • Page 1 DS-K3B220X Series Swing Barrier User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K3B220X Series Swing Barrier User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 DS-K3B220X Series Swing Barrier User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 6 DS-K3B220X Series Swing Barrier User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 7 DS-K3B220X Series Swing Barrier User Manual Cautions: Stainless steel may be corroded in some circumstances. You need to clean and care the device by ● using the stainless steel cleaner. It is suggested to clean the device every month. Do not drop the device or subject it to physical shock, and do not expose it to high ●...
  • Page 8 DS-K3B220X Series Swing Barrier User Manual Available Models Product Name Model Description Swing Barrier DS-K3B220X-L Left Pedestal DS-K3B220X-M Middle Pedestal DS-K3B220X-R Right Pedestal...

  • Page 9: Table Of Contents

    DS-K3B220X Series Swing Barrier User Manual Contents Chapter 1 Overview ........................1 1.1 Introduction ........................... 1 1.2 Main Features ........................1 Chapter 2 System Wiring ......................3 Chapter 3 Installation ......................... 6 Chapter 4 General Wiring ......................10 4.1 Components Introduction ....................10 4.2 Wiring ..........................
  • Page 10 DS-K3B220X Series Swing Barrier User Manual 5.1 Activate via SADP ......................... 33 5.2 Activate Device via iVMS-4200 Client Software ..............34 Chapter 6 Operation via Web Browser ..................36 6.1 Login ............................ 36 6.2 Overview ..........................36 6.3 Person Management ......................37 6.4 Search Event ........................
  • Page 11 DS-K3B220X Series Swing Barrier User Manual 7.2.1 Add Device ........................63 7.2.2 Reset Device Password ....................65 7.2.3 Manage Added Devices ....................66 7.3 Group Management ......................67 7.3.1 Add Group ........................67 7.3.2 Import Resources to Group ..................67 7.4 Person Management ......................
  • Page 12 DS-K3B220X Series Swing Barrier User Manual Appendix D. Table of Audio Index Related Content ..............100 Appendix E. Error Code Description ..................101 Appendix F. Communication Matrix and Device Command ............. 102...

  • Page 13: Chapter 1 Overview

    DS-K3B220X Series Swing Barrier User Manual Chapter 1 Overview 1.1 Introduction The Swing barrier with 4 IR lights is designed to detect unauthorized entrance or exit. By adopting the swing barrier integratedly with the access control system, person should authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc.
  • Page 14 DS-K3B220X Series Swing Barrier User Manual Valid passing duration settings ● System will cancel the passing permission if a person does not pass through the lane within the valid passing duration. Bidirectional (Entrance/Exit) lane ● The barrier opening and closing speed can be configured according to the visitor flow.

  • Page 15: Chapter 2 System Wiring

    DS-K3B220X Series Swing Barrier User Manual Chapter 2 System Wiring The preparation before installation and general wiring. Steps Note The device should be installed on the concrete surface or other non-flammable surfaces. ● If the installation area is too close to the wall, make sure the distance between the pedestal and ●...
  • Page 16 DS-K3B220X Series Swing Barrier User Manual Figure 2-1 Dimension 1. Draw a central line on the installation surface of the left or right pedestal. 2. Draw other parallel lines for installing the other pedestals. Note The distance between the nearest two line is L + 146 mm. L represents the lane width.
  • Page 17 DS-K3B220X Series Swing Barrier User Manual Figure 2-2 Hole Position and System Wiring 4. Bury cables. Each lane buries 1 high voltage cable and 1 low voltage cable. For details, see the system wiring diagram of step 3. Note High voltage: AC power input ●...

  • Page 18: Chapter 3 Installation

    DS-K3B220X Series Swing Barrier User Manual Chapter 3 Installation 1. Before installation, you should unscrew and disassemble the pedestal. Figure 3-1 Screw Hole 2. Keep the disassembled components and make sure the accessories are intact. 3. Prepare for system wiring and installation. For details, see System Wiring .
  • Page 19 DS-K3B220X Series Swing Barrier User Manual 4. Place the pedestal above the embedded expansion bolt. Unscrew and remove the maintenance door. Figure 3-2 Maintenance Door 5. Place the platen on the expansion bolt and adjust the position of the pedestal to make sure the...
  • Page 20 DS-K3B220X Series Swing Barrier User Manual Figure 3-3 Platen 6. Fasten the nuts of the expansion bolts with a screwdriver (shaft diameter under 7 mm and shank length more than 120 mm) and reinstall the maintenance door. Scan the QR Code to watch the installation guide video.
  • Page 21 DS-K3B220X Series Swing Barrier User Manual...

  • Page 22: Chapter 4 General Wiring

    DS-K3B220X Series Swing Barrier User Manual Chapter 4 General Wiring Note When you should maintain or disassemble the high voltage modules, you should remove the ● entire high voltage modules and maintain it outside the turnstile. You should unplug the cables that connected to the peripherals before maintenance to avoid destroy of the device.

  • Page 23: Wiring

    DS-K3B220X Series Swing Barrier User Manual Figure 4-2 IR Sending/Receiving Module Position Note Standing at the entrance position in the lane, the IR modules on your left are the IR sending modules, the ones on your right are the IR receiving modules.

  • Page 24: Terminal Description

    DS-K3B220X Series Swing Barrier User Manual 4.3 Terminal Description The lane controller contains main lane controller and sub lane controller, which controls the IR beams, motor, and other components' work. 4.3.1 Main Lane Control Board Terminal Description The main lane control board contains interconnecting interface, USB flash drive interface...

  • Page 25: Sub Lane Control Board Terminal Description

    DS-K3B220X Series Swing Barrier User Manual Figure 4-3 Main Lane Control Board Terminals 4.3.2 Sub Lane Control Board Terminal Description The sub lane control board contains interconnecting interface, USB flash drive interface (reserved), access control board interface, exit button interface, 12 VDC power output interface (reserved), 24 VDC power input interface, fan interface, communication interface, encoder interface, power supply interface for motor, supercapacitor interface, IR adaptor interface and light bar interface.

  • Page 26: Access Control Board Terminal Description

    DS-K3B220X Series Swing Barrier User Manual Figure 4-4 Sub Lane Control Board Terminals 4.3.3 Access Control Board Terminal Description Access control board is mainly used for authority identification in places with high security levels such as public security or judicial place, external device accessing, and communication with the...
  • Page 27 DS-K3B220X Series Swing Barrier User Manual Note RS-485A corresponds to port 5 on web and is for QR code scanner connection by default; ● RS-485C corresponds to port 7 on web and is for card reader connection by default. The SOC and MCU serial port are for maintenance and debugging use only.

  • Page 28: Main Optional Board Terminal Description (Optional)

    DS-K3B220X Series Swing Barrier User Manual Figure 4-5 Wring Diagram of BUS3 Interface 4.3.4 Main Optional Board Terminal Description (Optional) The main optional board contains the sub-1G antenna interface, loudspeaker interface, debugging port, Wiegand/exit button interface, 5 VDC output and communication interface.
  • Page 29 DS-K3B220X Series Swing Barrier User Manual Figure 4-6 Main Optional Board Terminal...

  • Page 30: Sub Optional Board Terminal Description (Optional)

    DS-K3B220X Series Swing Barrier User Manual 4.3.5 Sub Optional Board Terminal Description (Optional) Figure 4-7 Sub Optional Board Terminal Note RS-485B corresponds to uart 6 on web and is for QR code scanner connection by default. ● RS-485D corresponds to uart 4 on web and is for card reader connection by default.

  • Page 31: General Wiring

    DS-K3B220X Series Swing Barrier User Manual Figure 4-8 Card Reader Board 4.3.7 General Wiring The general wiring of lane control board, access control board and optional board. Figure 4-9 General Wiring...

  • Page 32: Wiring

    DS-K3B220X Series Swing Barrier User Manual Note The power cable from power supply to the main lane control board has been connected. You will ● need to prepare the 14AWG power cable to connect the AC power input to power supply.

  • Page 33: Wiring

    DS-K3B220X Series Swing Barrier User Manual 4.3.9 RS-232 Wiring Note There is 1 RS-232 interface on the extended interface of access control board. The RS-232A ● corresponds to uart 1 on web, connecting to fingerprint scanner by default. There is 1 available RS-232 interface on the sub optional board. The RS-232B corresponds to uart ●...

  • Page 34: Exit Button Wiring

    DS-K3B220X Series Swing Barrier User Manual Figure 4-13 Remaining Closed 4.3.11 Exit Button Wiring The main and sub lane control board each has 1 button interface, which can be connected to exit button or face recognition device. Figure 4-14 Exit Button Wiring...

  • Page 35: Device Settings

    DS-K3B220X Series Swing Barrier User Manual 4.4 Device Settings You can configure the device via button on the main lane control board or the DIP switch on the access control board. Function Main Lane Control Board & Access Control Board & Loudspeaker (Optional)

  • Page 36: Configuration Via Button

    DS-K3B220X Series Swing Barrier User Manual Function Main Lane Control Board & Access Control Board & Loudspeaker (Optional) Light Brightness Configure via button/​ w eb Restore to Default Configure via button/​ w eb Voice Prompt Climbing over Barrier Enable or disable via button...
  • Page 37 DS-K3B220X Series Swing Barrier User Manual Button Description Figure 4-15 Button Exit Button Single press to open the barrier from the entrance position. ● Double press to open the barrier from the exit position. ● Parameter Configuration Button LEFT: Press to add ten to configuration data ●...
  • Page 38 DS-K3B220X Series Swing Barrier User Manual Button Configuration Procedure Figure 4-16 Procedure Steps: 1. Enter the configuration mode. The number of 1 will show up on the right side of the screen and the device is ready for configuration. 2. Press LEFT and RIGHT to set the configuration No. Press OK to enter the level-2 menu and view the parameters.

  • Page 39: Normal/Study Mode Settings

    DS-K3B220X Series Swing Barrier User Manual 4.4.2 Normal/Study Mode Settings Set normal mode or study mode for device via button or DIP switch. Set Study Mode via Button Enter the study mode through button configuration to set the closed position of the device barrier.
  • Page 40 DS-K3B220X Series Swing Barrier User Manual Figure 4-17 DIP Switch Location...

  • Page 41: Keyfob Pairing

    DS-K3B220X Series Swing Barrier User Manual Figure 4-18 Study Mode 2. Adjust the closed position of the barrier. 3. Power on the device. The device will remember the current position (closed position) automatically. 4. Power off the device. 5. Set the No.1 switches of the 2-digit DIP Switch on the main user extended interface board by referring to the following figure.
  • Page 42 DS-K3B220X Series Swing Barrier User Manual 3. Set the configuration No. to "2" and the parameter to "1". The device enters the normal mode. 4. Reboot the device to take effect. Pair Keyfob Pair the remote control to the device through DIP switch to open/close the barrier remotely.

  • Page 43: Initialize Device

    DS-K3B220X Series Swing Barrier User Manual Figure 4-21 Enable Keyfob Paring Mode 3. Power on the turnstile and it will enter the keyfob pairing mode. 4. Hold the Close button for more than 10 seconds. The keyfob's indicator of the will flash twice if the pairing is completed.
  • Page 44 DS-K3B220X Series Swing Barrier User Manual Note Make sure no persons are in the lane when powering on the device.

  • Page 45: Chapter 5 Activation

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 46: Activate Device Via Ivms-4200 Client Software

    DS-K3B220X Series Swing Barrier User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 47 DS-K3B220X Series Swing Barrier User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 48: Chapter 6 Operation Via Web Browser

    DS-K3B220X Series Swing Barrier User Manual Chapter 6 Operation via Web Browser 6.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation .

  • Page 49: Person Management

    DS-K3B220X Series Swing Barrier User Manual You can check if the device is working properly. Click View More to view the detailed component status. Remote Control The door is opened/closed/remaining open/remaining closed. Real-Time Event You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can also click View More to enter the search conditions, including the event type, employee ID, the name, the card No., the start time, and the end time, and click Search.
  • Page 50 DS-K3B220X Series Swing Barrier User Manual Figure 6-2 Add Person Add Basic Information Click Person Management → Add to enter the Add Person page. Add the person's basic information, including the employee ID, the person's name, the gender, and person type.

  • Page 51: Search Event

    DS-K3B220X Series Swing Barrier User Manual Enable Long-Term Effective User, or set Validity Period and the person can only has the permission within the configured time period according to your actual needs. Click Save to save the settings. Add Card Click Person Management →...
  • Page 52 DS-K3B220X Series Swing Barrier User Manual Figure 6-3 Search Event Enter the search conditions, including the event type, the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel.

  • Page 53: Configuration

    DS-K3B220X Series Swing Barrier User Manual 6.5 Configuration 6.5.1 View Device Information Click Configuration → System → System Settings → Basic Information to enter the configuration page. You can view the device name, language, model, serial No., version, IO input, IO output, local RS-485, alarm input, alarm output, and device capacity, etc.

  • Page 54: Set Dst

    DS-K3B220X Series Swing Barrier User Manual You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time.

  • Page 55: View Device Arming/Disarming Information

    DS-K3B220X Series Swing Barrier User Manual 6.5.6 View Device Arming/Disarming Information View device arming type and arming IP address. Go to Configuration → User Management → Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page.
  • Page 56 DS-K3B220X Series Swing Barrier User Manual Select a NIC type from the drop-down list. By default, it is Auto. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU.

  • Page 57: Event Linkage

    DS-K3B220X Series Swing Barrier User Manual HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. HTTPS Set the HTTPS for accessing the browser.

  • Page 58: Access Control Settings

    DS-K3B220X Series Swing Barrier User Manual - If you choose Linkage Type as Employee ID Linkage, you need to enter the employee ID and select the card reader. 3. Set linked action. Linked Buzzer Enable Linked Buzzer and select Start Buzzing or Stop Buzzing for the target event.
  • Page 59 DS-K3B220X Series Swing Barrier User Manual Terminal Choose Entrance or Exit for settings. Terminal Type/Terminal Model Get terminal description. They are read-only. Enable Authentication Device Enable the authentication function. Authentication Select an authentication mode according to your actual needs from the drop-down list.
  • Page 60 DS-K3B220X Series Swing Barrier User Manual Figure 6-9 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select Entrance or Exit for settings. Door Name You can create a name for the door. Open Duration Set the door unlocking duration.
  • Page 61 DS-K3B220X Series Swing Barrier User Manual Steps 1. Click Configuration → Access Control → Serial Port Configuration . Figure 6-10 Serial Port Settings 2. Set the No., Baud Rate, Data Bit, Stop Bit and Parity. 3. Set the Peripheral Type as Card Reader, QR Code Scanner or Disable.

  • Page 62: Turnstile

    DS-K3B220X Series Swing Barrier User Manual Set Terminal Parameters Set the working mode. Steps 1. Set the device working mode. Figure 6-11 Working Mode Permission Free Mode The device will not verify the person's permission, but only the person's validity period. If the person is in the validity period, the barrier will open.
  • Page 63 DS-K3B220X Series Swing Barrier User Manual Figure 6-12 Basic Parameters 2. View the Device Type, Device Model and Working Status. 3. Set Barrier Material, Lane Width, Barrier Opening Speed and Barrier Closing Speed. 4. Set the passing mode. - If you choose General Passing, you can select the barrier status for the entrance and exit from the drop-down list.
  • Page 64 DS-K3B220X Series Swing Barrier User Manual Figure 6-13 keyfob 2. View the keyfob working status. 3. Set Working Mode as One-to-One or One-to-Many. 4. Add keyfob. 1) Click Add and the keyfob adding window will pop up. 2) Enter the Name and Serial No..
  • Page 65 DS-K3B220X Series Swing Barrier User Manual Enable Custom Anti-pinch for Door Closing Anti-pinch for door closing refers that the barrier will not close if the device has detected person in the lane. Only after the person walks out of the lane, the barrier will close. If you enable the function, you can shield parts of the IR beams for closing barrier in advance.

  • Page 66: Card Settings

    DS-K3B220X Series Swing Barrier User Manual Note The alarm output duration ranges from 0 s to 3599 s. 3. Set Temperature Unit. 4. Check to enable Do Not Open Barrier When Lane is Not Clear. 5. Drag the block or enter the value to adjust the light board brightness.
  • Page 67 DS-K3B220X Series Swing Barrier User Manual Figure 6-16 Card Type Set the parameters and click Save. Enable NFC Card In order to prevent the mobile phone from getting the data of the access control, you can enable NFC card to increase the security level of the data.

  • Page 68: Set Privacy Parameters

    DS-K3B220X Series Swing Barrier User Manual Enable CPU Card Enable CPU card and authenticating by presenting CPU card is available. CPU Card Read Content After enable the CPU card content reading function, the device can read the CPU card content.

  • Page 69: Device Debugging

    DS-K3B220X Series Swing Barrier User Manual Note Do not power off during the upgrading. Restore Parameters Click Maintenance and Security → Maintenance → Backup and Reset . Restore All All parameters will be restored to the factory settings. You should activate the device before usage.
  • Page 70 DS-K3B220X Series Swing Barrier User Manual Main Lane Status Figure 6-17 Main Lane Status Device Component You can view the status of the access control board, lane control board, extended interface board, and arrow light board. Peripheral You can view the status of the RS-485 card reader.

  • Page 71: Log Query

    DS-K3B220X Series Swing Barrier User Manual Peripheral You can view the status of the RS-485 card reader. Movement You can view the working status of motor encoder. Others Figure 6-19 Other Status Passing Mode You can view the entrance and exit mode.

  • Page 72: Certificate Management

    DS-K3B220X Series Swing Barrier User Manual The results will be displayed below, which including the No., time, the major type the minor type, the channel No., the local/remote user information, the remote host IP, etc. 6.5.17 Certificate Management It helps to manage the server/client certificates and CA certificate.
  • Page 73 DS-K3B220X Series Swing Barrier User Manual Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Maintenance and Security → Security → Certificate Management . 2. Create an ID in the Import CA Certificate area.

  • Page 74: Chapter 7 Client Software Configuration

    DS-K3B220X Series Swing Barrier User Manual Chapter 7 Client Software Configuration You can call the hotline to get the iVMS-4200 client software installation package. 7.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software.

  • Page 75: Device Management

    DS-K3B220X Series Swing Barrier User Manual 7.2 Device Management The client supports managing access control devices and video intercom devices. Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations.
  • Page 76 DS-K3B220X Series Swing Barrier User Manual Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 77: Reset Device Password

    DS-K3B220X Series Swing Barrier User Manual 5. Open the exported template file and enter the required information of the devices to be added on the corresponding column. Note For detailed description of the required fields, refer to the introductions in the template.

  • Page 78: Manage Added Devices

    DS-K3B220X Series Swing Barrier User Manual All the online devices sharing the same subnet will be displayed in the list. 3. Select the device from the list and click on the Operation column. 4. Reset the device password. - Click Generate to pop up the QR Code window and click Download to save the QR code to your PC.

  • Page 79: Group Management

    DS-K3B220X Series Swing Barrier User Manual View Online User Click to view the details of online user who access the device, including user name, user type, IP address and login time. Refresh Device Click to refresh and get the latest device information.

  • Page 80: Person Management

    DS-K3B220X Series Swing Barrier User Manual 2. Click Device Management → Group to enter the group management page. 3. Select a group from the group list and select the resource type as Access Point, Alarm Input, Alarm Output, etc. 4. Click Import.

  • Page 81: Import And Export Person Identify Information

    DS-K3B220X Series Swing Barrier User Manual 7.4.2 Import and Export Person Identify Information You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC.
  • Page 82 DS-K3B220X Series Swing Barrier User Manual 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel and check Face.

  • Page 83: Get Person Information From Access Control Device

    DS-K3B220X Series Swing Barrier User Manual Before You Start Make sure you have added persons and their face pictures to an organization. ● Make sure you have enabled the Export Person Information function to display the Export ● button. See for details.

  • Page 84: Issue Cards To Persons In Batch

    DS-K3B220X Series Swing Barrier User Manual Note If you select the enrollment station, you should click Login, and enter IP address, port No., user name and password of the device. 5. Select the Getting Mode. Note The getting mode varies according to different devices. The access control device supports getting the person information by employee ID.

  • Page 85: Set Card Issuing Parameters

    DS-K3B220X Series Swing Barrier User Manual Steps 1. Enter Person module. 2. Select the person you want to report card loss for and click Edit to open the Edit Person window. 3. In the Credential → Card panel, click on the added card to set this card as lost card.

  • Page 86: Configure Schedule And Template

    DS-K3B220X Series Swing Barrier User Manual Enable or disable the buzzing when the card number is read successfully. Card No. Type Select the type of the card number according to actual needs. M1 Card Encryption This field is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E.

  • Page 87: Add Template

    DS-K3B220X Series Swing Barrier User Manual 2) Drag the cursor to draw the time duration, which means in that duration of time, the configured access group is activated. Note Up to 8 time durations can be set to one holiday period.

  • Page 88: Set Access Group To Assign Access Authorization To Persons

    DS-K3B220X Series Swing Barrier User Manual 1) Click Week Schedule tab on the lower panel. 2) Select a day of the week and draw time duration(s) on the timeline bar. Note Up to 8 time duration(s) can be set for each day in the week schedule.
  • Page 89 DS-K3B220X Series Swing Barrier User Manual picture, linkage between card number and fingerprint, linkage between card number and fingerprint, card password, card effective period, etc). 1. Click Access Control → Authorization → Access Group to enter the Access Group interface.

  • Page 90: Configure Advanced Functions

    DS-K3B220X Series Swing Barrier User Manual 3) Click Apply All to Devices or Apply Changes to Devices. Apply All to Devices This operation will clear all the existed access groups of the selected devices and then apply the new access group to the device.

  • Page 91: Configure Device Parameters

    DS-K3B220X Series Swing Barrier User Manual Note For the card related functions(the type of access control card/multi-factor authentication), only ● the card(s) with access group applied will be listed when adding cards. The advanced functions should be supported by the device.
  • Page 92 DS-K3B220X Series Swing Barrier User Manual Display the card information when authenticating. Display Person Information Display the person information when authenticating. Overlay Person Info. on Picture Display the person information on the captured picture. Voice Prompt If you enable this function, the voice prompt is enabled in the device. You can hear the voice prompt when operating in the device.
  • Page 93 DS-K3B220X Series Swing Barrier User Manual 3. Select a door or floor to show its parameters on the right page. 4. Edit the door or floor parameters. Note The displayed parameters may vary for different access control devices. ● Some of the following parameters are not listed in the Basic Information page, click More to ●...
  • Page 94 DS-K3B220X Series Swing Barrier User Manual Note The duress code, super code, and dismiss code should be different. ● The duress code, super password, and the dismiss code should be different from the ● authentication password. The length of duress code, super password, and the dismiss code is according the device, ●...
  • Page 95 DS-K3B220X Series Swing Barrier User Manual When you inputting the password on the card reader, if the interval between pressing two digits is larger than the set value, the digits you pressed before will be cleared automatically. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value.
  • Page 96 DS-K3B220X Series Swing Barrier User Manual Set the matching security level when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. Live Face Detection Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not.
  • Page 97 DS-K3B220X Series Swing Barrier User Manual Alarm Output Active Time How long the alarm output will last after triggered. 4. Click OK. 5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output. Configure Parameters for Lane Controller After adding the lane controller to the client, you can configure its parameters for passing through the lane.

  • Page 98: Configure Other Parameters

    DS-K3B220X Series Swing Barrier User Manual Temperature Unit Select the temperature unit that displayed in the device status. 4. Click OK. 7.7.2 Configure Other Parameters After adding the access control device, you can set its parameters such as network parameters, capture parameters, RS-485 parameters, Wiegand parameters, etc.
  • Page 99 DS-K3B220X Series Swing Barrier User Manual Save Authenticating Face Picture If enabled, the captured face picture when authenticating will be saved on the device. MCU Version View the device MCU version. 5. Click Save. Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode.

  • Page 100: Door/Elevator Control

    DS-K3B220X Series Swing Barrier User Manual 3. Select an access control device in the device list and click Wiegand to enter the Wiegand Settings page. 4. Set the switch to on to enable the Wiegand function for the device. 5. Select the Wiegand channel No. and the communication mode from the drop-down list.

  • Page 101: Control Door Status

    DS-K3B220X Series Swing Barrier User Manual 7.8.1 Control Door Status You can control the status for the door(s), including unlock door, locking door, remaining the door unlock, remaining the door locked, remain all unlocked, etc. Before You Start Add person and assign access authorization to designed person, and person will have the access ●...

  • Page 102: Check Real-Time Access Records

    DS-K3B220X Series Swing Barrier User Manual All doors in the group will be closed and locked. No person can access the doors even if he/she has the authorized credentials, except the super users. Capture Capture a picture manually. Note The Capture button is available when the device supports capture function. The picture is saved in the PC running the client.
  • Page 103 DS-K3B220X Series Swing Barrier User Manual 2. Optional: Select an access point group from the drop-down list in the upper-right corner to show the real time access records of the selected group. 3. Optional: Check the event type and event status.

  • Page 104: Appendix A. Dip Switch

    DS-K3B220X Series Swing Barrier User Manual Appendix A. DIP Switch A.1 DIP Switch Description The DIP switch is on the access control board. No.1 and No 2 is from the low bit to the high bit. Figure A-1 DIP Switch When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off.

  • Page 105: Appendix B. Button Configuration Description

    DS-K3B220X Series Swing Barrier User Manual Appendix B. Button Configuration Description Refer to the table below for device configuration via button on the main lane control board. Description Default Value Parameters Notes Normal/Study 1-Normal Mode Mode 2-Study Mode keyfob Pairing...
  • Page 106 DS-K3B220X Series Swing Barrier User Manual Description Default Value Parameters Notes 11-Entrance under control; exit on free mode 12-Entrance on inductive mode; exit remaining open 13-Entrance on inductive mode; exit on free mode 14-Entrance prohibited; exit remaining open 15-Entrance prohibited; exit on...
  • Page 107 DS-K3B220X Series Swing Barrier User Manual Description Default Value Parameters Notes 22-Entrance on free mode; exit on inductive mode 23-Entrance on free mode; exit remaining open 24-Entrance on free mode; exit on free mode 25-Entrance on free mode; exit prohibited...
  • Page 108 DS-K3B220X Series Swing Barrier User Manual Description Default Value Parameters Notes Control Mode 1-​ B utton Configuration 2-DIP Switch on Access Control Board Authentication on 1-Disable Unable to change Free Passing 2-Enable IR Configuration 1-1，2-2, …, N-N for Closing in...
  • Page 109 DS-K3B220X Series Swing Barrier User Manual Description Default Value Parameters Notes 2-Enable Forced Passing 1-Disable Unable to change 2-Enable Tailgating Alarm 1-Disable 2-Enable Unauthorized 1-Disable Unable to change Passing 2-Enable Exceeding 1-Disable Unable to change Authentication 2-Enable Duration Failed 1-Disable...
  • Page 110 DS-K3B220X Series Swing Barrier User Manual Description Default Value Parameters Notes brighter the light will be. Self-check Voice 1-Disable Voice prompt of Prompt self-check at 2-Enable startup and motor inspection Study Mode Voice 1-Disable Voice prompt of Prompt study mode...

  • Page 111: Appendix C. Event And Alarm Type

    DS-K3B220X Series Swing Barrier User Manual Appendix C. Event and Alarm Type Event Alarm Type Tailgating Visual and Audible Reverse Passing Visual and Audible Force Accessing None Climb over Barrier Visual and Audible Overstay Visual and Audible Passing Timeout None...
  • Page 112 DS-K3B220X Series Swing Barrier User Manual Appendix D. Table of Audio Index Related Content Index Content Climbing over the barrier. Reverse passing. Passing timeout. Intrusion. Tailgating. Overstay.
  • Page 113 DS-K3B220X Series Swing Barrier User Manual Appendix E. Error Code Description The swing barrier will display the error code on the seven-segment display if error occurred. Refer to the table below to find the description of each number. Error Reason...
  • Page 114 Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure F-2 Device Command...
  • Page 115 UD30051B...

This manual is also suitable for:

Ds-k3b220x-lDs-k3b220x-mDs-k3b220x-r

Table of Contents