Quick Start Guide
Using the DSP96002ADM
1.3.2
Connecting the DSP96002ADM to the PC and Power
Figure 1-2 shows the interconnection diagram for connecting the PC and the external
power supply to the DSP96002ADM board. Using the instructions in the Application
Development System User's Manual, connect the Command Converter to the ADM
board. Power for the ADM is supplied from the Command Converter module.
Host Computer
1.4
USING THE DSP96002ADM
Once the ADM is installed, it becomes a part of the Application Development System.
Use information in the Application Development System User's Manual to develop your
application design, debug it, and test it.
1-8
37-pin
Interface
Cable
Host-Bus
Interface Card
Command
Converter
Application Development Module (ADM)
Figure 1-2 Application Development
DSP96002ADMUM/AD, Preliminary
14-pin
Ribbon
Cable
Motorola DSP
User Application
Circuits
MOTOROLA