Table of Contents
Advertisement
Activating the software license
Procedure
1.
Connect the USB memory that stores the installation key to the USB connector on the PC.
2.
Open the Web menu. (Refer to
3.
Click [License] tab.
4.
Click [Install] on the [Installation Key].
5.
Select "Installation Key (RQ_LIC.DAT)" and click [Execute].
6.
Check that "Active" appears next to the software license in License Information.
Note
To use the software license function, reboot the board.
1-14-6.
Setting the SNMP Function
This section describes SNMP settings on the IP Video Interface (ST2110) board.
Use the [SNMP] tab of the web menu to make the settings.
Note
To make the SNMP function available, the option license must be enabled. For details, refer to
Software
License".
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
"1-14-1. Displaying Web
Menu".)
"1-14-5. Installing the
1-32
Hide quick links:
Advertisement
Table of Contents
