Tripp Lite SmartOnline S3MX Owner's Manual page 36

4. Control Panel and LCD Operations
4.2.5.5 Setup Parallel Screen
Touch the "PARALLEL" tab to access the parallel function page. Refer to Table 4.11 for Setup Parallel Setting List.
Touch the "SYSTEM" tab to access the parallel or redundancy options.
(a) Paralleling two S3MX units for power.
Figure 4.19 Parallel Two Units
Table 4.11: Setup Parallel Setting List
Setting Item Sub Item
UPS Parallel --
Independent Battery --
Figure 4.18 Setup Parallel Screen
(b) Paralleling two S3MX units for redundancy, where each UPS is
carrying 50% of the load. If one UPS goes down, the other will take
over the full load.
Explanation
Set UPS Parallel
• Disable (Default)
• Enable
Set Independent Battery
• Disable (Default)
• Enable
36
Figure 4.20 Redundancy Across Two Units