Related Manuals for Target Project 62 TGT42WD-DW
Summary of Contents for Target Project 62 TGT42WD-DW
- Page 1 Deepwell Walled Desk with Drawer Style #: TGT42WD-DW DPC-item #: 249-14-5790 >> Assembly instructions © 2021 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
-
Page 2: Before You Begin
Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. - Page 3 FURNITURE TIPPING RESTRAINT YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES. TO PROVIDE PROTECTION AGAINST THE UNEXPECTED TIPPING OF FURNITURE DUE TO IMPROPER USE. USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE, THE RISK OF TIP-OVER.
- Page 4 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Deepwell Walled Desk with Drawer MODEL # TGT42WD-DW MAXIMUM LOAD 45.4 kg / 100 lb MAXIMUM LOAD 9.08 kg / 20 lb MAXIMUM LOAD 4.54 kg / 10 lb...
- Page 5 hardware (H1) x 6 (H2) x 6 (H3) x 13 (H4) x 4 (H5) x 4 (H6) x 2 cam lock cam bolt M6 x 30 mm 1/4” x 13 mm bolt M4 x 13 mm M4 x 25 mm wood dowel pan head screw screw...
-
Page 6: Exploded Diagram
exploded diagram ITEM DESCRIPTION Top panel Left side frame Right side frame Fixed shelf Back panel Drawer box left side panel Drawer box right side panel Drawer box partition panel Drawer face Drawer front panel Drawer left side Drawer right side Drawer back panel Drawer bottom panel Drawer bottom support... -
Page 7: How To Use The Cam Lock System
how to use the cam lock system Push cam into panel - arrow Align cam bolt(s) with cam(s) Screw cam bolt into panel feature on cam top points to and insert all the way into panel edge cross-bored hole(s) 190°-230° Panels should be tight against Rotate cam(s) clockwise each other and connection... - Page 8 step 1: attach drawer back panel (H7) x 4 M4 x 38 mm screw The grooves line up with each other and face inward 1.1. Attach drawer back panel (M) between the drawer side panels (K and L).
- Page 9 step 2: slide the drawer bottom panel 2.1. Slide the drawer bottom panel (N) into the grooves between the drawer side panels (K and L) until fully inserted into the groove of the drawer back panel (M).
- Page 10 step 3: secure the drawer front panel to the drawer side panels (H7) x 4 M4 x 38 mm screw 3.1. Secure the drawer front panel (J) to the drawer side panels (K and L) using four 38 mm screws (H7). Note: Make sure that the drawer bottom panel (N) fits securely into the groove of the drawer front panel.
- Page 11 step 4: fasten the drawer bottom support to drawer front and back panels (H7) x 4 M4 x 38 mm screw 4.1. Fasten the drawer bottom support (O) to the drawer front and back panels (J and M) using four 38 mm screws (H7).
- Page 12 step 5: attach drawer front panel to drawer face (H6) x 2 M4 x 25 mm screw 5.1. Attach drawer front panel (J) to the drawer face (I) using two 25 mm screws (H6) as shown.
- Page 13 step 6: Attach the handle (H9) x 1 (H8) x 1 handle Handle bolt 6.1. Fasten the handle (H9) to the front side of Drawer face (I).
- Page 14 step 7: Screw in the cam bolts (H2) x 6 cam bolt 7.1. Securely screw the cam bolts into the designated small holes on the top panel (A).
- Page 15 step 8: Attach the side panels and partition panel to the top panel (H1) x 6 (H3) x 6 cam lock M6 x 30 mm wood dowel The opening faces forward 8.1. Attach the drawer box side panels (F and G) and the partition panel (H) to the top panel (A) using six cam locks (H1) and six wood dowels (H3) as shown.
- Page 16 step 9: attach fixed shelf to side panels and partition panel The holes point in the same direction (H3) x 3 (H7) x 6 M6 x 30 mm M4 x 38 mm wood dowel screw 9.1. Attach the fixed shelf (D) to the panels (F, G and H) using six 38 mm screws (H7) and three wood dowels (H3).
- Page 17 step 10: Attach the side frames The pilot holes overlap the drilled holes 10.1. Using the pilot holes as a guide, attach side frames (B and C) to the previous assembly so that the mounting holes on the metal tabs overlap the threaded inserts on the fixed shelf (D) properly.
- Page 18 step 11: fasten the side frames NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H4) x 4 (H11) x 1 1/4”...
- Page 19 step 12: Insert the wood dowels (H3) x 4 M6 x 30 mm wood dowel 12.1. Insert the wood dowels (H3) into the inner holes on the panels (A and D) as shown.
- Page 20 step 13: fasten the side frames NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H13) x 4 (H14) x 4 1/4”...
- Page 21 step 14: attach back panel The pilot holes overlap the drilled holes (H17) x 1 grommet without cap The wood dowels fit the mounting holes on the back panel 14.1. Insert the grommet (17) to cover the hole in the Fixed shelf (D). 14.2.
- Page 22 step 15: fasten back panel to the top panel and fixed shelf (H7) x 6 M4 x 38 mm screw 15.1. Fasten the back panel (E) to the top panel (A) and fixed shelf (D).
- Page 23 step 16: secure the back panel (H5) x 4 M4 x 13 mm pan head screw 16.1. Secure the back panel (E) to the side frames (B and C) using four 13 mm pan head screws (H5).
- Page 24 step 17. install drawer kits to the unit Ball bearing cart Ball bearing cart Release lever Release lever Drawer installation (H10) x 4 (H16) x 1 cam lock cover grommet with cap 17.1. To insert the assembled drawers into the frame, simply push the ball bearing cart all the way to the end of the slides (on both sides), and align the slide runners on the drawers with the slides track on the unit.
- Page 25 step 18: Attach tipping restraint hardware Wooden stud Wall Short screw Wall (H12) x 1 tipping restraint hardware kit (inside plastic bag) Metal bracket Long screw Floor leveler Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit. 18.1.
-
Page 26: Care And Maintenance
Care and Maintenance • Use a soft, clean cloth that will not scratch the surface when dusting. • Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. • Using solvents of any kind on your furniture may damage the finish. •... - Page 27 The maximum recommended weight allowance is 45.4 kg / 100 lb for top surface. The maximum recommended weight allowance is 9.08 kg / 20 lb for fixed shelf. The maximum recommended weight allowance is 4.54 kg / 10 lb for drawer. Death or serious injury may occur when children climb on audio and/or video equipment furniture.