Chapter 5 Restrictions; Dcan; Watchdog Timer - NEC IE-703081-MC-EM1 User Manual

5.1 DCAN

Set software debugger (ID850) as follows when using the DCAN function.
• Supply +5 V to the VDD1 terminal (pin 115) from the target system before starting the software debugger.
• Make the following settings.
(Memory mapping column of configuration panel)
Memory Attribute: Target
Mapping Address: nF0000H to nFFFFFH
After inputting the values, click the Add button.

5.2 WATCHDOG TIMER

Set software debugger (ID850) as follows when using the WATCHDOG TIMER function.
• Supply +5 V to the VDD1 terminal (pin 115) from the target system before starting the software debugger.
• Do not set a "reset mask" via the configuration panel of the software debugger.

CHAPTER 5 RESTRICTIONS

18 IE-703081-MC-EM1 User's Manual