Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NEC IE-703081-MC-EM1
Summary of Contents for NEC IE-703081-MC-EM1
- Page 1 CUSTOMER NOTIFICATION SUD - F - 1270 March 14, 2001 Mitsuru Suzuki, Engineering Manager 3rd Systems LSI Engineering Dept. Solution Engineering Div. NEC Electron Devices NEC Corporation CP(K), C IE-703081-MC-EM1 User’s Manual (Preliminary) IE-703081-MC-EM1 User’s Manual...
- Page 2 • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
-
Page 3: Introduction
The IE-703081-MC-EM1 is used connected to the IE-703002-MC in-circuit emulator. This manual explains the basic setup procedure and switch settings of the IE-703002-MC when it is connected to the IE-703081-MC-EM1. For the names and functions of parts, and the connection of elements, refer to the IE-703002-MC User’s Manual (U11595E). - Page 4 RX850 [Real-time OS] Basics U13430E Installation U13410E RX850 Pro [Real-time OS] Fundamental U13773E Installation U13774E RD850 [Task debugger] Windows-based U11158E RD850 (Ver.3.0) [Task debugger] Windows-based U13737E RD850 Pro (Ver.3.0) [Task debugger] Windows-based U13916E AZ850 [System performance analyzer] U11181E IE-703081-MC-EM1 User’s Manual...
-
Page 5: Table Of Contents
1.4 System Configuration.........................9 1.5 Connection Between IE-703002-MC and IE-703081-MC-EM1..........10 CHAPTER 2 NAMES AND FUNCTIONS OF PARTS................12 2.1 Part Names and Functions of IE-703081-MC-EM1 ..............12 2.2 Clock Settings..........................13 2.3 Illegal Access Detection ROM Setting..................13 2.4 CPU Operation Voltage Range Switch Setting .................14... -
Page 6: Chapter 1 Overview
CHAPTER 1 OVERVIEW The IE-703081-MC-EM1 is an option board for the IE-703002-MC in-circuit emulator. By connecting the IE-703081- MC-EM1 and IE-703002-MC, hardware and software can be debugged efficiently in system development using the V850/DB1. In this manual, the basic setup procedure and switch settings of the IE-703002-MC when using the IE-703081-MC- EM1 are described. -
Page 7: Hardware Configuration
IE-700000-CD-IF-A: For PCMCIA socket. This module is used when a workstation controls the IE-703002- Network module MC via Ethernet. (IE-70000-MC-SV3) AC adapter for in-circuit emulator made by NEC Corporation. Power adapter (IE-70000-MC-PS-B) Note 1. Cannot be used for PC98-NX series. IE-703081-MC-EM1 User’s Manual... -
Page 8: Features (When Connected To Ie-703002-Mc)
• Pod tip direct connection (for information on the pod, refer to the IE-703002-MC User’s Manual (U11595E)). • Attach an extension probe (sold separately) to the pod tip for connection. • The dimensions of the IE-703081-MC-EM1 are as follows. Parameter Value Power consumption (at 16 MHz operation frequency) 5.5 W (IE-703081-MC-EM1+IE-703002-MC) -
Page 9: System Configuration
1.4 System Configuration The system configuration when connecting the IE-703002-MC to the IE-703081-MC-EM1 and a personal computer (PC-9800 series or PC/AT (or compatible)) is shown below. Figure 1-1. System Configuration <4> ‡ C ‡ C <5> ‡ D ‡ D <1>... -
Page 10: Connection Between Ie-703002-Mc And Ie-703081-Mc-Em1
<2> Set the PGA socket lever of the IE-703081-MC-EM1 to the OPEN position. <3> Connect the IE-703081-MC-EM1 to the PGA socket at the back of the IE-703002-MC pod. When connecting, position the IE-703002-MC and the IE-703081-MC-EM1 so that they are horizontal. - Page 11 (3) When extension probe is not used. SWEX-128SD220 1RWH Note YQPACK128SD220 NQPACK128SD220 Target system Note The connector for emulator connection (YQSOCKET128SD220) can be inserted at this position for height adjustment. IE-703081-MC-EM1 User’s Manual...
-
Page 12: Chapter 2 Names And Functions Of Parts
CHAPTER 2 NAMES AND FUNCTIONS OF PARTS This chapter describes the names, functions, and switch settings of the parts in the IE-703081-MC-EM1. For the details of the pod, jumper, and switch positions, etc., refer to the IE-703002-MC User’s Manual (U11595E). -
Page 13: Clock Settings
IE-703002-MC Setting Note The target clock is not supported. 2.3 Illegal Access Detection ROM Setting If using the IE-703002-MC as an in-circuit emulator for the V850/DB1 by connecting the IE-703081-MC-EM1, set JP1 of the IE-703081-MC as follows. IE-703002-MC Setting Open... -
Page 14: Cpu Operation Voltage Range Switch Setting
2.4 CPU Operation Voltage Range Switch Setting If using the IE-703002-MC as an in-circuit emulator for the V850/DB1 by connecting the IE-703081-MC-EM1, JP3 and JP4 of the IE-703002-MC as follows. IE-703002-MC Setting Shorted Open IE-703081-MC-EM1 User’s Manual... -
Page 15: Chapter 3 Factory Settings
CHAPTER 3 FACTORY SETTINGS IE-703081-MC-EM1 Setting 4 MHz oscillator mounted IE-703081-MC-EM1 User’s Manual... -
Page 16: Chapter 4 Cautions
The RESET signal from the target system is delayed (7.5 ns (MAX.)) because it passes through VHC00 and VHC04 before it is input to the I/O chip of the emulator. Target voltage IE-703081-MC-EM1 Target system VHC04 EVA CHIP VHC00 RESET Signal IE-703081-MC-EM1 User’s Manual... -
Page 17: Smvdd Terminal
4.5 SMVDD Terminal Connect a power supply of the same voltage as SMVDD0,1 to the SMVDD terminal (TP16) when the current of the SMxx terminal exceeds 200 mA in total. IE-703081-MC-EM1 User’s Manual... -
Page 18: Chapter 5 Restrictions
Set software debugger (ID850) as follows when using the WATCHDOG TIMER function. • Supply +5 V to the VDD1 terminal (pin 115) from the target system before starting the software debugger. • Do not set a “reset mask” via the configuration panel of the software debugger. IE-703081-MC-EM1 User’s Manual...