Attach The Antenna Cable - Sony SAS-B65D Service Manual

Attach the antenna cable

2
Getting started
You can configure your system several ways, depending on what additional
components (such as a VCR, DVD player, or A/V receiver) you select. For now,
however, use the simplest configuration to check your antenna and cabling.
• Ensure that the DIRECTV
• Attach the RG-6 coaxial antenna cable to the
the back of the DIRECTV Receiver. Refer to the appropriate figure below.
VHF/UHF IN
VHF (SAT)
/UHF OUT
1 2 3
Table 1: Rear panel connections - SAT-B65A DIRECTV Receiver
1 SATELLITE IN connector
2 VHF/UHF IN connector
3 VHF (SAT)/UHF OUT connector
4 AUDIO OUTPUT (R) jack
5 AUDIO OUTPUT (L) jack
6
VHF/UHF IN
VHF (SAT)
/UHF OUT
1 2 3 4 5
Table 2: Rear panel connections - SAT-A65A DIRECTV Receiver
1 SATELLITE IN connector
2 RF REMOTE antenna jack
3 DATA PORT
4 DIGITAL AUDIO OUTPUT optical jack
5 VHF (SAT)/UHF OUT connector
6 VHF/UHF IN connector
7 AUDIO OUTPUT (R) jack
8 AUDIO OUTPUT (R) jack
® Receiver is not plugged into an electrical outlet.
SATELLITE IN
TEL LINE
4 5 6 7 8
6 VIDEO OUTPUT jack
7 S-VIDEO jack
8 TELEPHONE JACK
9 AC POWER CORD
8 10 12
14
TEL LINE
7 9
11
13 15
9 AUDIO OUTPUT (L) jack
10 AUDIO OUTPUT (L) jack
11 VIDEO OUTPUT jack
12 VIDEO OUTPUT jack
13 S-VIDEO jack
14 VCR CONTROL cable jack
15 TELEPHONE JACK
16 AC POWER CORD
connector on
Model: SAT-B65
R
Digital Satellite Receiver
Sony Electronics, Inc.
Made in Mexico
9
Model: SAT-A65
R
Digital Satellite Receiver
Sony Electronics, Inc.
Made in Mexico
16