Siemens SINUMERIK 840D sl Universal Operating Manual page 60

Fundamentals
3.4 Operator interface
Procedure
Editing characters using the Pinyin method
+
Editing characters using the Zhuyin method (only traditional Chinese)
+
60
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Enter the desired phonetic notation using Latin letters. Use the upper
input field for traditional Chinese.
3. Press the <Cursor down> key to reach the dictionary.
4. Keeping the <Cursor down> key pressed, displays all the entered phonetic
notations and the associated selection characters.
5. Press the <BACKSPACE> softkey to delete entered phonetic notations.
6. Press the number key to insert the associated character.
When a character is selected, the editor records the frequency with which
it is selected for a specific phonetic notation and offers this character at the
top of the list when the editor is next opened.
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Enter the desired phonetic notation using the numerical block.
Each number is assigned a certain number of letters that can be selected
by pressing the numeric key one or several times.
3. Press the <Cursor down> key to reach the dictionary.
4. Keeping the <Cursor down> key pressed, displays all the entered phonetic
notations and the associated selection characters.
5. Press the <BACKSPACE> softkey to delete entered phonetic notations.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal