Preparations; Charging The Battery Pack - Canon XA60 Instruction Manual

Charging the Battery Pack

2

Preparations

Preparations
Charging the Battery Pack
The camcorder can be powered with a battery pack or directly using the PD-E1 USB Power Adapter.
1 Connect the USB power adapter to the camcorder
16
and plug the power cord into a power outlet.
2 Attach the battery pack to the camcorder.
• Press the battery pack softly into the battery attachment
unit and slide it forward until it clicks in place.
3 Charging will start when the camcorder is turned off.
• If the camcorder was on, the green POWER/CHG indicator
will go out when you turn off the camcorder. After a
moment, the POWER/CHG indicator will turn on in red
(battery pack charging). The red POWER/CHG indicator will
go out when the battery pack is fully charged.
• If the indicator flashes, refer to Troubleshooting (A 132).
DC IN terminal
POWER/CHG (battery charging) indicator