Table of Contents
Advertisement
2
Preparing the Power Supply
You can power the camcorder using a battery pack or directly using the supplied compact power adapter. If you
connect the compact power adapter to the camcorder while a battery pack is attached, the camcorder will draw
power from the power outlet.
Attaching the Ferrite Core
Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder. Attaching the
ferrite core to the compact power adapter cable is necessary to suppress RF interference.
1 Attach the ferrite core to the cable about 6 cm (2.4 in.) from the DC plug
(the plug to be connected to the DC IN terminal).
2 Pass the cable through the center of the core and wrap it around the core
(as shown in the illustration), then close the unit until it clicks shut.
Charging a Battery Pack
You can power the camcorder using the supplied BP-820 Battery Pack or the optional BP-828 Battery Pack.
Both battery packs are compatible with Intelligent System so you can check the approximate remaining battery
usage time (in minutes) on the screen. For more accurate readings, when using a battery pack for the first time,
charge it fully and then use the camcorder until the battery pack is completely depleted.
1 Connect the compact power adapter to the camcorder and plug the power cord into a power outlet.
2 Attach the battery pack to the camcorder.
Preparations
17
Advertisement
Table of Contents
