Settings - AEG FFB62620PW User Manual

8 www.aeg.com
5.1 Consumption values
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
Water
1)
(l)
10.5
7 - 15
12.5 - 14.5
12 - 14
10
9 - 10
Energy
(kWh)
0.921
0.6 - 1.7
1.4 - 1.7
0.7 - 0.9
0.9
1.1 - 1.3
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
flashes and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously Delay and
Option until the appliance is in
programme selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously Delay and Option until
the indicators
flash and the display is blank.
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
Duration
(min)
225
40 - 170
170 - 190
82 - 92
30
230 - 250
, , and