Before First Starting - Baumatic BDW603SS1 User Manual

How to Drain Excess Water From Hoses
If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable
container that is held outside and lower than the sink.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.
Syphon Connection
The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dish.
The water drain hose should be fixed .
Cabinet installation
When installing the dishwasher into cabinetry, be sure to observe the minimum space requirements as shown
in the below diagram.

Before first starting

The following things should be checked before starting the dishwasher.
1
The dishwasher is level and fixed properly.
2
The inlet valve is open.
3
There is no leakage at the connections of the conducts.
4
The wires are tightly connected.
5
The power is switched on.
6
The inlet and drain hoses are not knotted and kinked.
7
All packing and printing materials should be taken out of the dishwasher.
Attention:
After installation, please make sure to keep this manual.
The content of this manual is very helpful to the users.
14