Checking For Open Zones; Using The [∗] Key - Honeywell First Alert FA130CP User Manual

Checking For Open Zones

Using the [∗ ∗ ∗ ∗ ] Key
Before arming your system, all protected doors, windows and other protection zones
must be closed or bypassed, otherwise the keypad will display a "Not Ready" message.
1. Press [∗] READY (do not enter code first) to display
faulted zones.
2. Secure or bypass the zones displayed.
The keypad's READY indicator lights when all
3.
protection zones have been either closed or bypassed.
4. Arm the system as desired.
Voice Status: Voice Keypads (if installed), can announce system status and faulted
zones (up to 3 zone descriptors) if the Voice Status feature is turned on.
To turn the Voice Status feature on/off:
(also turns on Voice Chime mode; see Chime mode section)
To announce Status: Press [#] FUNCTION + [0] VOICE + [∗] STATUS key.
To announce faults: Press [#] FUNCTION + [0] VOICE + [∗] STATUS + [∗] again
– 14 –
(Announces current system status; e.g., "Disarmed Ready to
Arm.")
within 5 seconds of the first press. (Announces up to three
faulted zones with their zone descriptors, if programmed.)
Alpha Display:
DISARMED - PRESS ∗
TO SHOW FAULTS
Fixed-Word Display:
Zone no. and "NOT READY"
# + 0 + 2 + 4